Author Topic: Increase number of cycles  (Read 8510 times)


  • Landscape Pro
  • *
  • Posts: 2
Increase number of cycles
« on: October 09, 2013, 09:08:30 am »
People like Urban Farmer recommend splitting zone run times into 7-10 or more cycles; this is particularly useful for conventional sprinklers (with high precip rates) over clay soil and/or sloped conditions.

I would also suggest setting the default number of cycles at the max (rather than "1", the min). I'm not an expert, but I suspect low effective precipitation rate is always better, and runoff is never good. With the inter-cycle delay set to "auto" the total length of the program is not affected, it's just more efficient.