LawnCheck Smart Irrigation
LawnCheck FAQ and Help => LawnCheck Introductory FAQ => Topic started by: Jim on February 26, 2009, 01:54:24 pm
-
There are three methods:
1. Run a network cable to the install location
2. Use a Wireless (WiFi) Bridge
3. Use Ethernet Powerline network adapters.
Networking cables, CAT5E, can be run a distance of around 300 ft.
Here is a link providing information about: Using a Wireless Bridge (http://www.quicksmart.com/downloads/ER Wifi App Note WET54g.pdf)
Here is a link providing information about: Using Powerline Networking (http://www.quicksmart.com//downloads/ER Powerline App Note.pdf)